PVC Necklet 1:
This is for making a simple necklet using your glasswork or polymer clay piece, it can also be used for any other piece with a flat back.
1) Cut the PVC to the required length
2) Glue the EC01 2.0mm end caps onto the PVC using Loctite 401. It is important not to use the wrong glue as the ends will probably fall off it you do
3) Glue your pendant onto the bail BA12. You do not use Loctite here, you would use a 2 part epoxy glue for this
4) Thread the bail onto the PVC
5) Attache a jump ring to one end cap and the bolt ring to the other
|
|||||||||||||
|
|||||||||||||
|
|||||||||||||
|
|||||||||||||
|
|||||||||||||
